Available in ¾”, 1” and 1” ¼ sizes, they can be set with high quality steel inserts (AP2 type with flow straightener) or carbide ones. Jet configuration must be specifically ordered on the base of type (AP2 or carbide inserts) and cleaning action required (unblocking or descaling). The WGR with SWITCHER head is 2 tools in 1. It is possible to switch between pulling or cleaning without removing the nozzle from the pipe. When the pump is idled down and brought back to pressure the tool will switch the water flow between two different sets of jets.
- Save water and time by eliminating the extra runs needed to swap nozzles.
- Run more jobs with one tank of water.
- Switch to pulling jets for maximum thrust.
- Switch to cleaning jets maximizes power to clear debris and cutting roots.
|Ø x L (mm)||110 x 270|
|Front Jet||1 x 15°|
|Radial Jets||2 x 85°|
|Rear Jets||4 x 38°|
|Maximum Pressure (bar)||350|
|Working DN (mm)||200-900|
|74997.01.SI||WGR 1″ Warthog nozzle, without inserts|
|74997.01.TSA||SWITCHER HEAD (R31) FOR MAGNUM NOZZLE, W/AP2 INSERTS|
|74997.01.TSW||SWITCHER HEAD (R31) FOR MAGNUM NOZZLE, WITH CARBIDE INSERTS|
|TA.WGR||STANDARD JET CONFIGURATION (4+ 1) W/AP2 INSERTS FOR WGR|
|TA.WGR.W||STANDARD JET CONFIGURATION (4+ 1) W/CARBIDE INSERTS FOR WGR|
|TA.WGR.WDS||DESCALING JET CONFIGURATION (4 +2+PLUG) W/CARBIDE INS.FOR WGR|