Depending on the request several tools are available (carbide theeth, knives, saws, ..) and can be installed on the milling head.
The head rotation power is given by a turbine that absorbs 10% of the total flow. The residual flow provides the thrust required to proceed within the pipe and the impact of the milling head.
WAMAX 100 is delivered with a set of guides, heads and accessories that can be applied from DN 100 up to DN 200 mm.
WAMAX 200 and 300 are configured upon request.
|Inlet||1″ F||1″ 1/4 F||1″1/4 F|
|Ø x L (mm)||75 x 240||125 x 460||150 x 500|
|Inserts||4 x M12 C||8 x TE 1/4 C||8 x TE 1/4 C|
|Working DN (mm)||100-200||150-500||300-800|
|77100.00||1″ WAMAX 100 MILLING NOZZLE|
|77200.00||Wamax 200, milling system pric e on request|
|77300.00||Wamax 300, milling system pric e on request|