Trolley Reel with 3/8″ or 1/4″ Inlet
This reel allows operators to safely perform cleaning and unclogging operations on domestic pipelines using 3/16″ or 1/4″ hoses (not included).
Compact Trolley Reel
You can use this reel away from you washing or hp unit.
XL Trolley Reel
For remote use with jetting units, equipped with ball valve with oversized lever and pressure gauge to measure inlet pressure.
Adapter for Mr. Olimpia Manhole Lifter
The Mr. Olimpia Manhole Lifter Adapter is a wheeled tool for use with the magnetic Mr. Olimpia Manhole Lifter. Thanks to its wheels and lever mechanism, it facilitates lifting and repositioning of manhole covers with minimal effort for the operator.
Centralizer DN 300-600
Centralizer for DN300-600 pipes, with 4 skids fitted with steel wheels, that allow the guide to easily slide along the pipe. The skids give stability to the centralizer, particularly strained when used with nozzles with chains.
Through a mechanical device it is possible to adapt the position of the guide inside the pipe, to optimize the efficiency of the nozzle.
In order to enable the connection with the flexible hose a swivel jont has been installed.
It is a must for nozzles with chains (Maniago, Friuli, Catena), and recommended for slow rotation nozzles (Warthog).
Magnetic Hoist Hammer 250 kg
Magnetic hoist hammer is a perfect gadget for opening of street caps, underground hydrants and all kind of cast iron lids.
Magnetic Hoist MK250 Flex
This magnetic manhole lifter is a perfect accessory for opening manhole covers, underground hydrants and all types of cast iron covers. MK250 Flex extends the advantages and features of the SuperStrong 250 kg with a flexible joint between the vertical rod and the magnet, while also integrating the self-supporting mode typical of Mr. Olimpia.
Remote Mini Reel
Manual HP Mini Reel, with gauge and valve to open/close, for a totally safe remote cleaning.
This accessory replaces the radio remote control and it is:
 |
Simple |
|
Cost-saving |
|
Efficient |
|
Safe (max pressure 350 bar) |
SS Nozzles Holder Bar
The bar allows to safely block the nozzles in a very comfortable manner: this way you have them in a very handy position.
It features 1/2″ M BSPP fittings that can host 4 nozzles with a 1/2″ F inlet.
Centralizers DN 150-300
DN 150-300 centralizer with a set of adjustable position skids.
Centralizers DN 200-450
DN 200-450 centralizer with 2 sets of adjustable position skids.
Centralizers DN 225-600
DN 225-600 centralizer with pantograph opening, and rubber wheels.