Warthog Magnum WGR
Warthog MAGNUM WGR nozzles have been designed and manufactured for longer durability (compared with the classic nozzles) and specific use with water recycling units.
Description
This nozzle can be set with high quality steel inserts (AP2 type with flow straightener) or carbide ones. Jet configuration must be specifically ordered on the base of type (AP2 or carbide inserts) and cleaning action required (unblocking or descaling).The WGR Magnum with SWITCHER head is 2 tools in 1. It is possible to switch between pulling and cleaning without removing the nozzle from the pipe. When the pump is idled down and brought back to pressure the tool will switch the water flow between two different sets of jets.
Advantages:
- Save water and time by eliminating the extra runs needed to swap nozzles.
- Run more jobs with one tank of water.
- Switch to pulling jets for maximum thrust.
- Switch to cleaning jets maximizes power to clear debris and cutting roots.
Technical Specifications
| Inlet | 1″ | 1″ 1/4 |
| Ø x L (mm) | 110 x 270 | 110 x 280 |
| Weight (kg) | 4.9 | 4.9 |
| Front Jet | 1 x 15° | 1 x 15° |
| Radial Jets | 2 x 85° | n/d |
| Rear Jets | 4 x 38° | 6 x 38° |
| Maximum Pressure (bar) | 350 | 350 |
| Flow (lt/min) | >190 | >190 |
| Working DN (mm) | 200-900 | 200-900 |
Items
Nozzle 1″
| Part No. | Description | |
|---|---|---|
| 74997.01 | 1″ WGR WARTHOG NOZZLE |
Nozzle 1″ 1/4
| Part No. | Description | |
|---|---|---|
| 74998.00 | WGR MAGNUM 1″ 1/4 WARTHOG NOZZLE |
Inserts Configurations 1″
| Part No. | Description | |
|---|---|---|
| TA.WGR | STANDARD JET CONFIGURATION (4+1) W/AP2 INSERTS FOR WGR | |
| TA.WGR.W | STANDARD JET CONFIGURATION (4+1) W/CARBIDE INSERTS FOR WGR | |
| TA.WGR.WDS | DESCALING JET CONFIGURATION (4+2+PLUG) W/CARBIDE INS.FOR WGR |
Inserts Configurations
| Part No. | Description | |
|---|---|---|
| TA.WGR125 | AP2 INSERT CONFIGURATION FORWGR MAGNUM NOZZLE 1″ 1/4 | |
| TA.WGR125.W | CARBIDE INSERT CONFIGURATION FOR WGR 1″ 1/4 WARTHOG NOZZLE |
